USB socket

These days it is very common to use an iPad or other type of tablet as a control panel for home and building automation, music or for example, as a picture frame. The iPad or tablet is often hung on the wall in this case. But how does the tablet get powered? The supplied USB charger with plug connection, of course, is not suitable for installation. If the USB charger is plugged into a power outlet, the USB cable will hang awkwardly in sight. That can be done better!

The chargeUP 12W is completely flush installed in a standard electrical installation box. With the aid of an extra short charging cable (available as an accessory) between tablet and chargeUP 12W, a tablet can be mounted completely flat on the wall together with various wall mounts available on the market, where both the cable and the charger are completely out of sight.

Completely flat installation also means that 100% flat installation is possible. The USB output is constructed with the chargeUP 12W so that the USB connector does not protrude. The ingenious concept behind the chargeUP 12W invites you to creative solutions, anywhere that needs to be charged, but where the USB charger needs a fixed place, or theft prevention of charger and / or charging cable is important.

For example, the chargeUP 12W can also be mounted behind standard, commercially available, blind cover frames for integration into existing switchgear.

The chargeUP 12W offers the perfect balance between a charger with a fixed, non-removable cable and a regular charger where the cable can easily be removed. Due to the smart construction of the USB port, the USB cable can not be removed easily after assembly. At the same time, the chargeUP 12W offers the flexibility to be combined with a wide variety of USB peripherals: from USB-A to Lightning, Micro-USB and even to USB-C is available. And all certified too!